首页 > Building Monitoring
Building Monitoring
Building Monitoring
Building Online Monitoring System

 
1. Monitoring Background
With the increase in height and load of high-rise buildings, uneven settlement of the building may occur under the combined action of the foundation and upper structure, leading to tilting or cracking of the building, affecting normal use, and even endangering the safety of the building. Therefore, the stability and reliability of buildings have become the focus of people's attention. Only regular monitoring of buildings, with a focus on prevention, can ensure the safe use of buildings.

II. System Overview
The freesun Technology Building Online Monitoring System installs advanced monitoring sensors on buildings to dynamically monitor the safety conditions of high-rise buildings, such as tilt, settlement, wind speed and direction, cracks, etc. in real time.

 
III. Monitoring Diagram

Settlement monitoring: Monitor the settlement of building foundations, determine the settlement amount, settlement difference, and settlement velocity of buildings and foundations.

Tilt monitoring: Monitor the tilt of the main structure of the building, determine the tilt angle, tilt direction, and tilt rate of the top monitoring point relative to the bottom fixed point of the building.

Crack monitoring: Measuring the opening and closing of diagonal cracks or structural cracks on other load-bearing components of buildings caused by settlement, as well as the rate of change of cracks.

Strain monitoring: monitoring the changes in internal force distribution of the main load-bearing components of buildings.

Vibration monitoring: Conduct vibration monitoring on the main structure of buildings.

Environmental risk monitoring: mainly considers monitoring factors that have an impact on the safety of the main structure of the building.

 
IV. List of Monitoring Projects

Wind speed and direction sensor
Monitoring itemDevice name
SettlementStatic level
TiltBox type fixed inclinometer
crackCrack gauge
VibrationVibration sensor
Wind speed and direction
Stress and strainvibrating wire strain gauge
 

 
V. Monitoring Basis
Technical Regulations for Construction of High speed Tunnel Engineering Q/CR9604-2015
Technical Specification for Construction Monitoring of Highway Tunnels (Draft for Comments)
Technical Code for Monitoring of Building Excavation Engineering GB 50497-2009
Technical Specification for Monitoring of Urban Rail Transit Engineering GB50911-2013Technical Specification for Strong Vibration Safety Monitoring of Hydraulic Structures DL/T 5416-2009
Sixth, Implement Functions
1. Real time monitoring of the safety status of buildings, through an automated monitoring platform, helps customer management units achieve information-based safety monitoring and process management, no longer affected by weather.
Once a warning occurs at any location on site, different alarm methods will be adopted according to the warning level, and emergency response measures will be taken in a timely manner in conjunction with relevant responsible units to evacuate the crowd, transfer in a timely manner, and reduce the occurrence of accidents and disasters.
3. Real time long-term automated monitoring to prevent major accidents, reduce economic losses, and maintain social stability.


Copyright © 2026 All Rights Reserved 版权所有· 江西飞尚科技有限公司      备案号:赣ICP备13000994号-1     许可证编号:赣B2-20230512
技术支持:
专属客服
专属微信客服