1、 Monitoring background
2、 Monitoring content
1) Monitoring the vibration amplitude (velocity and displacement) of key parts of the turbine foundation plate;
2) Static displacement monitoring of each bearing seat position on the platform;
3) Local settlement monitoring of foundation platform;
4) Monitoring the working status of the spring group of the spring isolator;
5) Monitoring of environmental temperature inside and outside the platform.

3、 Monitoring equipment
1. Optoelectronic deflectometer
Monitoring is carried out using a photoelectric deflectometer, which is a new type of long-distance non-contact displacement measurement sensor developed using an embedded system platform and a low light COMS image sensor. The product is mainly used for long-term automated monitoring of bridge deflection, with characteristics such as adaptive measurement distance, large measurement range, high measurement accuracy, small size, high integration, and easy installation and construction.
The infrared target can be installed in the middle of the tested beam, and the photoelectric deflection instrument can be installed at different stable structures in the horizontal path. At the same measuring point, using one target and one photoelectric deflectometer, vertical and horizontal displacement monitoring can be achieved simultaneously.
Monitoring items | Equipment name | Technical indicators | Remarks |
Platform static displacement | Photoelectric deflectometer | Target requirements: Infrared light target; Measurement distance and accuracy: 5-120m, ≤± 0.3mm (@ distance 35m) Image sensor: COMS low light image sensor; Measurement frequency: 10Hz, up to 30Hz (depending on the number of targets); Working voltage: DC12V; Communication interface: RJ45; Power consumption: 6W Working temperature: -20 ℃~70 ℃; Working humidity: 0%~95% RH |
|
2. Box type fixed inclinometer
The box type fixed inclinometer is used for monitoring. The box type fixed inclinometer is mainly used for long-term automatic measurement of horizontal displacement and inclination of dams, deep foundation pits, slopes, foundations, building bridges, ship berthing platforms, etc. This instrument has been certified by a national metrology authority and has undergone extensive engineering inspections. The test data is stable and reliable, easy to operate, suitable for various environments, and is currently a specialized testing instrument for inclinometers.
When installing, pay attention to aligning the installation direction of the box type fixed inclinometer with the monitoring direction of the structure. After installation, read the initial value of the box type fixed inclinometer as the initial state of the monitored structure. During long-term monitoring, compare the value of the box type fixed inclinometer with the initial value, and based on the comparison results, the inclination of the structure can be reflected.
Monitoring items | Equipment name | Technical indicators |
|
Platform static displacement | Box type fixed inclinometer | Standard range: ± 30 °; Sensor: Dual axis MEMS sensor; Resolution: 10 inches; System accuracy: ± 0.01 °; Temperature range: -20~+60 ℃; Power supply: DC12V/2A; Impact resistance: 2000g Static current: 50mA@25 ℃; Communication method: RS485; |
|
3. Data Collection System
The box type fixed inclinometer outputs RS485 signals, which can be collected using the data acquisition system V1.0 and connected to the data acquisitioninstrument inside the cabinet through signal cables to achieve signal transmission. The parameters of the acquisition device are as follows:
Monitoring items | Equipment name | Technical indicators |
Platform static displacement | Data Collection System V1.0 | Number of channels: 4; Power supply: DC12V/3.34A; Tong TongCommunication interface: RS-485; |
4. Piezoelectric speed sensor
The piezoelectric velocity sensor is used to monitor the vibration velocity and displacement of the platform, which has the characteristics of small size, light weight, good low-frequency characteristics, high resolution, large dynamic range, and easy use. It can be applied to bridge vibration monitoring, cable force monitoring, blasting vibration monitoring, and motor vibration monitoring. The specific parameter indicators are shown in the table below.
Monitoring items | Equipment name | Technical indicators | Remarks |
Vibration velocity and displacement of the table | Piezoelectric speed sensor | Axial sensitivity (23 ± 5 ℃): 500mV/mm/s; Range: ± 10mm/s; Maximum lateral sensitivity:<5%; Frequency response (± 10%): 2~6000 Hz Installation resonant frequency:>32 KHz; Working temperature range: -40~+85 ℃; |
5. Lightweight data acquisition device
Monitoring items | Equipment name | Technical indicators | Remarks |
Monitoring of Platform Vibration Speed and Displacement | Lightweight data acquisition device | Number of channels: 8 channels per unit; Sampling rate (continuous sampling): 1, 2, 5, 10, 20, 50, 100, 200, 500, 5k (Hz) per channel; Frequency response range: DC~2000Hz; Communication methods: 4G, Ethernet; Power supply: AC power supply: AC 220/50Hz, DC power supply: 9-36V DC; |
4、 Software system
1. Software Overview
The unified data collection software is a software product developed in conjunction with sensors by Jiangxi freesun Technology Co., Ltd. It is designed to monitor different structures and devices in real-time. It can be used to view data in real-time using a standalone software, synchronize the collected data to the cloud, and display it through the web. It also hasa real-time alarm system to improve maintenance efficiency.
Software operating environment
The software operating environment requirements are as follows:
(1) System: Windows 7 64 bit is the best;
(2) Operating platform: NET version 4.0 or above (the platform will install accompanying software);
(3) Peripheral interface: The system supports RS232 or USB2.0 interfaces. As the acquisition device is in bus 485 mode, it needs to be converted from RS232 to RS485 or USB-RS485 when connected to a computer. Our company provides various types of converters;
(4) Depending on the on-site environment, there may be other requirements.
1.2Function Introduction and Use
This software mainly has functions such as configuration, data collection, data synchronization, historical data query, and system diagnosis;
(1) Configuration: Configure the parameters of the structure, communication method, and sensors;
(2) Collection: View and select the sensors that collect data, choose the collection strategy, and view the collection records;
(3) Synchronization: Synchronize the collected data to Anxin Cloud;
(4) Data: Data display, which allows viewing of historical and raw data, including graphical displays that visually show the trend of data changes and whether they fall within the threshold range; Added data export function for easy data filtering and analysis.









