首页 > Automated Monitoring Of High Support Models At Yugan County Cultural Center No. 4
Automated Monitoring Of High Support Models At Yugan County Cultural Center No. 4
Automated Monitoring Of High Support Models At Yugan County Cultural Center No. 4
1.  Project Overview
The new construction project of the Yugan County Cultural Center is located north of Century Avenue, west of Yuting Avenue, and south of Mingzhu Road in the main urban area of Yugan County.
This project is a multi story civil building with four above ground floors and three partial floors, and one underground floor, constructed with a reinforced concrete frame structure. The building height is 23.70m (from outdoor ground to flat roof surface). The fire resistance level of above ground buildings is level 2, and the fire resistance level of basements is level 1. The total construction area of this project is 34384.09m2, including 34089.76m2 (including insulation layer area) for the fourth cultural center and 294.33m2 for the management building and public toilets. The above ground construction area of the fourth cultural center; 25271.94m2 (including insulation layer area), underground building area of Cultural Hall 4; 8817.82m2。
This project is classified as Level 1, with a structural design service life of 50 years.
The Yugan County Cultural Fourth Hall belongs to the urban public cultural tourism infrastructure construction project, located at the intersection of Century Avenue, Yuting Avenue, and Mingzhu Road in the main urban area, with convenient transportation. Therefore, in order to ensure the safety of the project's high formwork, an online monitoring system for high formwork will be constructed.
 
2.  Monitoring content
Monitoring itemsEquipment nameMonitoring purpose
Displacement monitoringDisplacement sensorUsing displacement sensors to measure settlement
Pole axial force monitoringWeighing sensorMonitor the axial force of the structure through an axial force meter
Monitoring of rod inclination angleBox type fixed inclinometer (node)Real time monitoring of the tilt of the bracket
III.  Monitoring significance
(1) Automatic monitoring:It can real-time monitor various measured parameters such as template settlement, pole axial force, and horizontal pole inclination angle.. Alarm thresholds for each parameter can be set according to the design. Mainly monitor the formwork settlement, pole axial force, member inclination angle, stress, etc. at key positions of segmented construction, establish a high support formwork online monitoring system, and timely understand the parameters of key structures. Timely grasp the safety status of high formwork; When the relevant data exceeds the limit, timely warning should be given and relevant measures should be taken to ensure construction safety;
(2) On site alarm:Equipped with an alarm, it automatically alarms when the monitoring value exceeds the threshold, supporting multiple alarm methods such as on-site sound and light alarm, SMS alarm, etc. To provide timely feedback on warning information to the greatest extent possible, sound and light alarms will be arranged on siteThe alarm device and system platform have multi-dimensional alarm channels to prevent the omission of alarm information.
(3) Data display:Real time data is recorded throughout the entire process, and data changes are dynamically displayed through methods such as curve graphs. Historical records can be traced.. The system collects, stores, and analyzes monitoring data to guide construction, improve the level of high formwork design, and enhance safety and reliability. Data analysis can be presented through methods such as curve charts, and historical data and alarm information can also be queried.
In addition, the system provides the most accurate information on the key structural response parameters and construction loads of high formwork, verifying the rationality of the design of the high formwork support system and providing certain data references for promoting the establishment of high formwork monitoring standards.
In additionto the above functions, rapid replication and integrated supervision can be achieved through system construction:
(1) Reproducibility module
Based on different construction site conditions, modularize and classify monitoring sub items, unify data processing formats, data transmission protocols, and system architecture, achieve replicable operations, and provide practical and feasible operation methods for large-scale promotion and use.
(2) Integration of Collection, Analysis, and Supervision
The monitoring system is fully automated and operates continuously, covering various periods of the construction process. It collects, analyzes, and runs synchronously, and real-time monitoring data is connected to the computer. Through the integration and analysis of a large amount of data, existing structural defects and quality degradation are identified in a timely manner, and their possible development trends and potential threats to structural safety are evaluated to ensure the safe operation of high formwork.
 
 

Copyright © 2026 All Rights Reserved 版权所有· 江西飞尚科技有限公司      备案号:赣ICP备13000994号-1     许可证编号:赣B2-20230512
技术支持:
专属客服
专属微信客服